VS1011E in YAMPP-3/USB and Loudness Mode (or EQ)

[Andy2005]

Please help!
I decided to make some modifications in my Yampp-3/USB, - change VS1001K to VS1011E, which faster.
In this way, how i understand, the serious problems is not seems to be, but...
'Loudness Mode' and downloadable EQ is no more working, if using the old firmware
I need the firmware modification for YAMPP-3/USB with support new VS1011E chip and "user code EQ"
I'm not a programmer, but i try...

[Andy2005]

Interesting information I found:

User code (like the Loudness software for VS1001k) doesn't work in VS1011.
We have made available a VS1011 version of the Loudness v1.41 package.
It is available for download at http://www.vlsi.fi/en/support/software/vs10xx-plugins.html.

If I upload this code into the VS1011E, it's may be work?
And, of course, I don't forget corrected in the firmware AICTRL register number:

One thing to notice though is that register SPI_AICTRL[0] is register number 12 (0xc) in VS1011 and not 13 (0xd) as in VS1001k

Right?

[Andy2005]

This is new EQ code for VS1011, prepared for upload to YAMPP.

http://rapidshare.com/files/361646500/Loudness_Mode_for_VS1011.bin

You can see it and say what's wrong?

Upload code as is version EQ for VS1001, - write to "wasteland_start" on HDD.
Not tested by me, yet, because i'm still ordering VS1011
I try upload this new code to my YAMPP on VS1001. Result: not working.

[Andy2005]

Good news!
I obtain the VS1011E for my YAMPP-3/U.
And this new EQ code has been tested by me.
It's working fine!