Hello Guys,
i order a ready assembled Editon from the Yampp3/USB.
I have Programm the Atmega162 with the STK500 and the 10Pin Connector.
If i load the Bootloader for M161C mode an set the COMPAT Fuse the bootloader works correctly an the Diode D5 ist blinking.
I can load the Firmware over USB, i load the Testcode on. At the Terminal i've got the correct Answer, but the Atmega doesnt answer to "?".
If i remove the COMPAT Flag the Bootloder doesnt react on close PIN8 and PIN15, but on the Terminal the Chip ist answering when i send "?"
With the other Bootloader is the same thing but adverse.
If i flash the newest Firmware it goes.
If i connect a Harddisk (I tried 2) to the player, i can see on the Terminal the follow Message:
Init.... Ready
Not YADL found
(take time)
Format Disk? Press Play.
I Push Play, the player ist asking that iam sure, i push play again. The Yampp is restarting and it cames the same message again. What do I Wrong.
I have the Atmega162 what Bootloader and what Firmware i have to use?
Have i to set the COMPAT flag at AVRStudio or not?
The connection with YamppLink won't work also, it cames any error or it hangs up on connecting.
I test the USB Connection with the Test Code, it works not 100% correctly, sometime there go characters missing.
Thanks for your help!
